2 ton manual type dzh steam boiler
First Affiliated Hospital of Bengbu fully implement the national environmental protection policies, strict screening of clean boiler as the supply of medical supplies disinfection and ward heating equipment. Fast boiler with its focus on research and development of clean-type gas boiler two decades of experience in the industry favored. The partnership, to provide fast boiler First Affiliated Hospital of Bengbu Medical College, a WNS20-1.25-YQ one condensing 2 ton manual type dzh steam boiler, in terms of design, manufacture, installation and other aspects of strict checks to enhance the thermal efficiency of the boiler as well as truly Energy saving and environmental protection.
2, Sheung Shui, when should slow to add water inside the 2 ton manual type dzh steam boiler feed water temperature is not too high.
3, add water, not too much, as the temperature of the water will continue to increase expansion, resulting in waste. Generally, add water to the normal water level of the water line also is the middle line on it, now supporting the steam boiler above all intelligent devices in Sheung Shui, simply open the smart addition of water it can be had.
Technical specifications of the 2 ton manual type dzh steam boiler steam boiler rated evaporation mainly, the rated steam pressure, steam temperature rated, water temperature and fuel .1, evaporation (d): Steam steam boiler operating safely when produced per hour number, i.e., evaporation of the boilers, with a "d" represents, tonnes / hour (t / h). 3, working pressure: refers to the maximum allowed steam boiler pressure. Working pressure is determined according to the design pressure, usually expressed in mpa. 4, temperature: degree of cold flag is a physical object, but also reflects a fundamental thermodynamic parameters of the material, i.e. usually Celsius "t ℃", indicated on the steam boiler plate at the outlet of a boiler is the temperature of the medium, and said the rated temperature. 5, fuel: Corporate optional use of steam boilers can make a choice according to local environmental requirements and availability of market fuel.
Domestic small and medium-sized power plant boiler generally adopts the medium pressure -3.82 MPa, 450 ° C or sub-high pressure 5.29 MPa-485 ° C, there is also low pressure parameters such as 2.5 MPa -400 ° C . If it is a condensate turbine for pure power generation, the higher the boiler parameters are, the smaller the boiler tonnage required for generating unit (1MW) electricity will be. If the lower the boiler parameters, the larger the tonnage of the boiler needed for generating unit (1MW) electricity. Medium pressure boiler can match 5 t/H for each MW for user reference, namely 5 mw pure power will need 25 t/H steam, say the pressure is 3.82 MPa and the temperature is 450 ° C.