cfb boiler in russifor textile factory
Causes the pressure in the cfb boiler in russifor textile factory, because the water in the boiler to absorb heat from the liquid state to a gaseous state, its volume expands, and the drum is a closed container, the steam can not be freely expanded, forced compression in the boiler, thus creating pressure. As the boiler is not operating at full load state, by enhancing combustion, can still pressure reaches the set value.
If the gas-fired cfb boiler in russifor textile factory is seriously short of water, the boiler will be deformed or even collapsed because of the overheating of the hot surface of the boiler, the expansion of the tube will make the expansion tube fall off, the heated surface steel will overheat or overburn, reduce or lose the bearing capacity, and the tube will explode. If handled improperly, damage and so on may lead to more serious consequences. What is the reason why the gas-fired boiler is short of water? The main reasons are as follows: the operator neglects, the monitoring of water level is not strict; after the boiler is discharged, the sewerage valve is not closed, the drain valve is closed, or the drain valve is leaking; the failure of the water supply equipment or the water supply pipe reduces or interrupts the supply of water; The water gauge is blocked by steam and water pipes. Leakage or other causes cause false water level; boiler water wall, convection tube bundle, energy-saving tube or pipe blasting discharge steam. When a water shortage is found, it can be judged by flushing a water gauge called water to determine whether it is slightly short of water or severely dehydrated. The steps for the called water operation are as follows: turn on the water level meter discharge cock; turn off the water level meter steam cock; and close the water meter drainage cock. At this point, if there is water level in the water table, the boiler is dehydrated slightly, otherwise the water shortage is serious. When the gas boiler water supply is slightly insufficient, the water level steam plug can be opened first, the normal operation of the water level gauge can be resumed, the fuel and air supply will be reduced, the combustion will be reduced, and the water can be used. A slow supply of water to the boiler can quickly determine the cause of the water shortage of the boiler. When the boiler water level gradually returns above the low safety level line, increase the fuel and air supply to restore the normal combustion of the boiler.
We produce steam cfb boiler in russifor textile factory is a very important part of the device, this provides a quick way to our gas steam boiler, after use, we found an excellent energy-saving effect boilers, flue gas discharge temperature is lower than the previous boiler equipment many, in line with national environmental provisions of the boiler equipment. --customer feedback
Benefit from rice husk fired cfb boiler in russifor textile factorys
A lot of large- and small-scale rice mills benefited from the improved furnace. Operations became profitable and sustainable. Moreover, conventional steam generating industries also gained from the fuel that was made available to them and it no longer remained a technology exclusively used by the rice mills. The new furnace also ensured a healthy working environment and air quality, since the flue gas would exit only through the chimney, thus improving the working conditions for workers.