Gas steam circulating fluidized bed boiler for textile industry in the manufacturing, transportation and installation, the repair process, it is inevitable to produce a number of dirt and grease, iron, slag, iron oxide and other impurities in the interior of each of the pressure parts soda system. These impurities but a soda system into operation, the boiler and turbine will cause great harm, so the boiler before officially put into operation after overhaul and new clothes must be chemically cleaned to remove the debris.

An ordinary heat circulating fluidized bed boiler for textile industry fuel gas after combustion caused by the need to release the heated water or other medium, the exhaust gas temperature is also high, more than 130 ℃, the flue gas will take away a lot of heat, resulting in energy waste, without environmentally friendly. Join the flue gas condensing boiler technology is about to be discharged out of the water vapor condenses, releasing latent heat in the flue gas into the boiler needs to provide heated water or other medium, adding more energy. Meanwhile, the exhaust gas temperature can be reduced to about 50 ℃, reduced emissions of harmful substances. So condensing boiler compared with ordinary boilers, thermal efficiency will be much higher.

At the end of 2017, China Guodian is located in Jiangxi Province Wanan Hydropower Plant After evaluating the situation, some of the steam circulating fluidized bed boiler for textile industry used to purchase much-needed daily work. Sales Manager fast boiler combined with the actual situation of the power plant for its recommendation 2 0.5 tons of electrically heated steam boilers.

Oil-fired circulating fluidized bed boiler for textile industry water gauge changing operation program fuel boiler water gauge changing operation program operating procedures: (1) to close the valve on the water with tube and steam union; (2) open the drain valve, the water in the water table, put a clean; (3 when the water table to replace oil-fired boiler;) in the table when dry, water table disassembly; (4) water gauge is mounted; (5) union and open water valves on steam pipe is connected, close the drain valve, the water level continues to be put into use table Points for attention: during the emergency operation, and always maintain the upper level or the highest security level.