dzl series coal fired steam boiler
For a long time, the boiler and burner are attributed to two different sectors each R & D re-combination, but the overall performance of the gas boiler, there is a qualitative impact. Fang fast R & D team after two years, estimates adjusted 300 times, breaking the status quo burner and boiler production separate, optimized depth coupled combustion system and heat transfer system architecture, combined boiler and combustion system, combustion system and successfully developed the depth of the heat transfer system coupled "Euromonitor θ5", so that gas-fired boiler into a complete energy system, to achieve a qualitative leap. "Euromonitor θ5" additional air pre-heater, cold air through the heat exchange tubes and the body opening for the flue gas countercurrent heat exchanger, the exhaust gas temperature is lowered while saving fuel; using a condenser, economizer flue gas heat recovery, thermal efficiency of the boiler can be increased by 10%; the use of FGR flue Gas recycling technology and Ultraten wing technology, improve heat transfer efficiency, emissions of nitrogen oxides emissions standards in line with domestic cities.
The characteristics of internal circulating fluidized bed boiler
The internal circulating fluidized bed boiler (ICFB) efficiently co-combusts industrial waste, biomass fuel and coal, provides steam or hot water, and sets new standards in limiting SOx and NOx generation. In addition to the characteristics of general CFB boiler, the internal CFB boiler also has the following special structure and characteristics:
1. The internal CFB boiler has buried pipes, which can increase the heating area and regulate the temperature in the dense area.
2. The internal CFB boiler has a large area of air distribution bed, so that the boiler has more heat storage, which is conducive to fuel combustion and burnout, and provides a congenital condition for a wider variety of coal adaptability;
3. The internal CFB boiler has a large cross-sectional area of the furnace, the flow rate of flue gas is low, which can improve the primary combustion rate of fuel, reduce the wear of the furnace, reduce the power consumption and energy consumption;
4. The wind arch composed of secondary air can supply oxygen and disturbance on the one hand, and on the other hand, can lengthen the combustion time of coal, which is conducive to coal burnout;
5. Water-cooled membrane wall of the cyclone separator, effectively prevent high temperature coking and center cylinder bias, which improves the efficiency of the separator;
6. Porous and controllable feed return valve makes the feed return reliable, even if the feed return has a coke block, since there are a lot of feed back port, there is no need to immediately stop the furnace, the user can stop the furnace when it is available for them to clear the coke.
7. Tail flue gas duct patented technology: water cooling furnace roof and chevron water cooling flue gas duct, can effectively solve the roof and smoke wall collapse and leakage of ash or air, which improve the environment of the boiler room.
Our horizontal CFB dzl series coal fired steam boiler for sale has various types: coal fired CFB steam boiler, biomass fired CFB steam boiler. This basic mode of operation is found in most every steam boiler, but there are a few modifications that have been created for different purposes. A superheated boiler takes the standard process and further heats the steam, increasing the temperature and energy output, and it commonly is used to rotate large turbines. Water tube boilers replace the large tank with a series of water-filled tubes that can reach boiling faster and give off more steam.
Gas-fired dzl series coal fired steam boiler applications include gas steam boiler steam boiler and hot water boiler two categories, under the policy from coal to gas, the use of gas steam boiler is also increasingly widespread up. Regional gas boiler is also engaged in the implementation of replacement or renovation project. Then come to you simply steam boiler applications have what? Steam boiler applications can be roughly divided into three categories, residential, commercial and industrial, civil and generally refers to the domestic gas boiler our lives with so-called boiler, primarily for home heating and bath with hot water , which is characterized by simple structure, convenient operation, long life, is the choice of most families choose; commercial, then generally refers to the star hotel, hospital school district heating mechanism, the general will choose to steam bath or gas boiler boiler for hot water supply of the main ways. Required in this area to select a gas boiler, characterized in that the gas or gas compared in terms of biomass fuel, no dust combustion, emissions in the flue gas can also control the amount of nitrogen emissions. Gas-fired steam boiler combustion more fully in value, mostly in the commercial is also a good choice; the last is the industrial furnace, industrial furnace is characteristic of large tonnage, high fuel demand, in general, the company received the heat a gas pipeline to gas as fuel, then the biggest advantage is that no storage, reducing transportation and storage costs of fuel, generally used for thermal power generation or industrial heating and heating company needs large industrial enterprises. These are the three main areas of use on gas-fired boiler to introduce today, hoping to help you have a better understanding of steam or hot water boiler, also hope that we can continue to focus on.