fire tube boiler malaysia manufacturer
As a leader in the fast side condensing gas fire tube boiler malaysia manufacturer, in recent years, provide a clean boiler to Beijing multiple office units, was well received. I units through the preliminary investigation and contrast, select fast boiler, it turns out, party fast product does have quite a good cleaning environmental performance, in line with the Beijing municipal government requirements for air pollution emissions, the use of very at ease. --customer feedback
Cleaning of Natural Gas BoilerNatural gas fire tube boiler malaysia manufacturer after a period of time will have scale, rust and other problems, which requires us to clean up equipment from time to time. Natural gas boiler cleaning is not like our daily necessities cleaning, see how this article is introduced. After a long period of operation, the natural gas boiler inevitably has the problem of scale and corrosion. The main reason for the formation of the scale in the boiler is that there is a hardness component in the feed water, and after continuous evaporation and concentration at high temperature and high pressure, A series of physical and chemical reactions take place in the furnace, resulting in the formation of a hard, dense scale on the heated surface, resulting in a decrease in the heat transfer effect and corrosion factors under the scale, which will lead to a pot The water wall furnace heat absorption decreases, the boiler outlet temperature increases, and the boiler loss increases. At the same time, after scaling in the water wall, the heat transfer effect is reduced, which may lead to the increase of the wall temperature of the water wall and the explosion of the water wall, which affects the safe operation of the natural gas boiler. Scale is the first harmful factor of boiler, and the main cause of boiler accident. Its harmfulness is mainly manifested in the waste of a large amount of fuel: because the thermal conductivity of scale is only a fraction of that of steel, the heat transfer will be blocked after scaling on the heated surface. In order to maintain a certain output of the boiler, it is necessary to raise the temperature on the side of the fire so as to cause the heat loss caused by outward radiation and exhaust smoke. Now you can. The gas-fired boiler is cleaned with high-efficiency environmentally friendly non-corrosive cleaning agent. The cleaning agent completely dissolves the cleaning scale, which makes the tube of the equipment exposed to the original metal color, and reduces the influence of scaling and biological algae sludge on the gas-fired boiler. At the same time, it can peel off iron oxide and ferrous oxide, prolong the service life of gas-fired boiler, reduce energy consumption and increase productivity. Natural gas boiler cleaning should be carried out by professional cleaning companies to ensure a thorough and effective cleaning equipment.
Boiler flue gas emissions have been an important reason for air pollution, while switching to a fire tube boiler malaysia manufacturer fueled with natural gas, but the flue gas still contains some nitrogen oxides, nitrogen oxides can be released into the atmosphere destroy the ozone layer, formed was dissolved in water rain will increase the acidity of rain, causing corrosion and acid rain on plant and its buildings, so reducing nitrogen oxide emissions has been an important measure to control air pollution.
Periodically check the fire tube boiler malaysia manufacturer with a certain pressure, because of the pressure, which can produce a high temperature well above 100 deg.] C, high-quality steam. But the pressure will have a certain risk, China has a dedicated quality control monitoring boiler inspection department, quality inspection once a year for the boiler, in order to ensure its good safety performance.