firetube vs watertube boilers industrial gas steam
6 tph WNS series condensing gas-fired steam firetube vs watertube boilers industrial steam for food industryFounded in 1991, Sichuan Liji Pickles & Flavouring Co., Ltd. is a large-scale agricultural and sideline products processing enterprise mainly engaged in the production of pickles, seasonings and red oil series dishes. In order to greatly improve production efficiency and effectively guarantee the stability of product quality, Liji Pickles & Flavouring introduced a series of automated production lines. The boiler is one of the important equipment in its automated production line. The sterilization and disinfection processes during the processing require the steam provided by the boiler.After inspecting many boiler manufacturers, ZOZEN's high-quality equipment and refined services won the trust of Liji Pickles & Flavouring and the company decided to purchase one set of 6 tph WNS series gas-fired steam boiler. This series of gas-fired boilers adopts a full corrugated furnace to enhance the smoke disturbance and effectively improve the heat transfer effect. The threaded tube is a high-efficiency heat transfer element developed by ZOZEN for many years, which can effectively absorb the flame energy after continuous optimization. With the finned tube condenser added at the tail of the flue, the boiler thermal efficiency can be as high as 98% as well as reducing the exhaust gas temperature. In addition, The fully automatic intelligent control and safety detection device ensures the safe operation of the boiler and provides a stable and reliable heat source guarantee for the efficient operation of the Liji Pickles & Flavouring automatic production line.
Multi fuel design CFB firetube vs watertube boilers industrial steam Challenge
Multi-fuel CFB boilers typically burn a mixture of waste or alternate fuels along with natural gas, fuel oil,or pulverized coal.This provides an opportunity to produce steam at lower cost than a basic fossil fuel fired unit, but it also makes operations more challenging.Waste and alternate fuels vary in Btu content per volume and their supply is often not consistent. This significantly affects combustion stability and the ability to reliably meet load. More expensive fossil fuels must be used when waste and alternate fuel is not available or to make up for low Btu. Managing this without excessive cost is difficult.In addition, operating within emissions constraints may be a problem with multiple fuel streams in the mix.
Water tube firetube vs watertube boilers industrial steam for cocoa factory
A 15-ton oil and gas water tube boiler produced by ZG boiler provides steam for cocoa processing. The plant is located in Côte d'Ivoire and requires a steam boiler for production due to the expansion of production.
In order to promote technological progress and sustainable development, improve environmental quality and protect public health, recently, the Liaoning Provincial People's Government of air pollutants for coal-fired power plants developed specific criteria (hereinafter referred to as the "standard"). This is the first time a set of policies Liaoning Province for air pollutant coal power plant.
"Standard" provides for pollutant discharge limits, surveillance and monitoring requirements within the jurisdiction of coal-fired power plant in Liaoning Province atmospheric and fugitive emissions control requirements. Since the implementation of the standards, air pollutant emissions coal-fired power plants all within the jurisdiction of Liaoning Province will be executed in accordance with the provisions of this standard.
2, since January 1, 2019, the emission limits of existing single output and more than 300MW generating units supporting the provision of a coal-fired power generation boilers execution table.
3, since 1 December 2020, the emission limits of existing single output 300MW generating units supporting the coal-fired power generation boilers and other power boilers as specified in Table 1 execution.
Sampling the exhaust gas (1) power plant, to be carried out in a predetermined position in accordance with the type of monitor emissions monitoring contaminants. In the discharge of pollutants should be set up to monitor the position of long-term monitoring holes, sampling platform and related facilities. When the sampling platform height from the ground greater than 40m, should be set by a lift platforms, lifts or other convenient and safe facilities. No elevator or elevator building coal-fired power plants, when the sampling platform height from the ground greater than 20m, should be set up safe, convenient electric monitoring equipment hoisting facilities.
Composition structure (3) continuous monitoring system atmospheric pollutants, technical requirements, test items, test methods and installation, commissioning, acceptance, operation management, data processing, etc. according to the provisions of HJ75 and HJ76.
(5) continuous monitoring system meter of air pollutants detection sensitivity, detection limit, and should meet the range of low concentrations of pollutant emission monitoring technical requirements, the concentration of nitrogen oxides include nitric oxide (NO) and nitrogen dioxide (of NO2), Determination of nitric oxide only has the ability to configure the analytical device of nitrogen oxides NO2 / NO converter.
(7) for coal-fired power boiler emissions of air pollutants sampling monitoring, sampling frequency, the sampling time and the operating load requirements,, HJ / T397 and related predetermined low exhaust gas concentration monitoring is performed according to specifications GB / T16157.
(9) shall be in accordance with the provisions of the enterprise "Environmental Monitoring and Management Measures" and the HJ819, HJ820 requirements of pollutant emissions and its impact on environmental quality around to conduct their own surveillance, monitoring and save the original records, public information.
Determination of air pollutants fired power plant analysis are shown in Table 2. After the release of the present embodiment national standard method of monitoring criteria pollutants, such as applicability to meet the requirements, the same applies to the determination of the corresponding standard contaminants present.
2, responsible for overseeing the management of this standard by the executive authorities and the standardization of administrative departments above the county level environmental protection. The results of the environmental protection departments at all levels and other relevant units in the enterprise supervision and checks can be instantly sampled or monitored the scene as determining whether acts of sewage meet emissions standards based on the relevant environmental protection and the implementation of management measures.