A scientific point of view to analyze how to take advantage of electric boiler heating With the development of science and technology, people increasingly high requirements of material life, cold winter does not necessarily require air conditioning, we can use electricity for heating boilers. Here we have from the scientific point of view to analyze the way electric heating boiler. 1. what is a scientific way of heating If you think that all modern heating equipment, are scientific, environmental protection, energy use, then you are wrong. Such as fuel, gas heaters, although the heating apparatus is a modern, fuel leakage to the combustion gas, although automatic alarm and shut-off device, but the electronic device can not be done reliably to 100%, if the leak is not detected region, due to wind or other reasons not leak alarm concentration of the standard and power supply shutdown system failure detection point automatic alarm and closing device would not work. Because of oil, gas boiler heating system is a closed loop system, so that the combustion furnace pressure increased dramatically and may explode at any time. Although fuel, gas stove with temperature, pressure detection protection, however, these detection and protection functions are also reliability issues, if not timely maintenance and service, the consequences would be disastrous. When you go out or because of other reasons had to shutdown for a period of time, you must not forget to water systems let go, or they will probably frozen pipes and storage tanks. Home heating oil, gas furnace requires a lot of oxygen at work, when we have to close the doors and windows energy-saving, which in addition to our indoor competition for limited oxygen, but also caused local air pollution, if the entire community is the use of home heating oil, gas furnace heating, people will be in a relatively large area of ​​air pollution, people's health will be jeopardized.

Safety precautions when using electric boilers hot oil fired horizontal water boiler prices has many safety precautions, especially hot water boilers, it is more to pay attention to some of the security detail during use. In operation hot water boiler must be put in line with the provisions of clothes, carefully check all parts of the boiler system, such as pressure gauge, safety valve, gas pipe fittings, water level, etc., everything is correct before continuing work. Must pay attention not to water one-handed operation, one hand and water in one hand and the door is open water steam valve, when the water column to a predetermined level, the first valving then off Watergate, this order can not be reversed, and the valving face when not to It is on the water, to prevent splash injuries face. In the boiler has been at work, surrounding someone must guard the moment the water level and pressure gauges, there can be no neglect of duty, if the night shift work, be sure to have a good rest during the day, so that when the work will not fall asleep at night, because once any carelessness, accidents will happen. And every night the boiler sewage treatment, water table should clean up once every night. For motor and other mechanical equipment have always been its inspection, if any abnormal findings, the investigation must be immediate. Weekly safety valve should be checked whether it is safe.

Handan: Before the end of October to complete the transformation of more than 10 tons of steam gas boiler burning low nitrogen

A few days ago, Handan City issued "on the deadline to complete the nitrogen oxide gas boiler governance" (the "Notice"), clear objectives, tasks nitrogen oxides governance gas boiler, expected to be completed more than 10 steam tons of gas before the end of October this year, low NOx combustion boiler reconstruction. "Notice" to the objectives and tasks of nitrogen oxide gas boiler control, time requirements, safeguard measures have been clearly defined.

First, the implementation of the transformation of ultra-low emissions

By the end of June 2020, the existing non-electrical gas steam boiler, hot water boiler, Stoker stoker furnace and completed the transformation of a low nitrogen combustion, soot, sulfur dioxide and nitrogen oxides reach 5mg / m³, 10mg / m³ , 30mg / m³, the new gas combustion boiler synchronizing means and is mounted low nitrogen meet emission standards. 20 tons of steam / hour or more gas-fired boiler installation atmospheric pollution automatic monitoring facilities, and networking with the environmental protection department, install a distributed control system (DCS system). 20 t steam / hour to be mounted gas-fired boiler exhaust gas nitrogen oxide analyzer.

Second, the phased completion of the task of transformation of governance

10 before the end 2018, to complete the combustion of the transformation Boilers nitrogen over 10 tons of steam, to complete the 1-10 tons of steam (having a steam tons and 10 tons of steam) combustion transform low nitrogen gas boiler before the end of October 2019, 2020 at the end of 6 before completing the transformation of low-nitrogen combustion gas steam boiler 1 ton. Counties (cities, districts) according to the actual situation, to be completed in advance of nitrogen oxides governance gas boiler.

Third, both subsidies and penalties

"Notice" requirement for acceptance of project management, to give appropriate subsidies comprehensive financial subsidies to control air pollution. Due to the unfinished task of governance be ordered to stop production of governance. For excessive emissions, fraud, unauthorized outage environmental protection facilities, waste-water treatment snuck issues such as rectification and punishment according to law; wrongdoing, be held criminally relevant personnel.

Three matters needing attention in daily maintenance of condensing boiler

The invention and use of boilers have a long history, and the use of condensing boilers, to a certain extent, makes full use of the heat of flue gas and water vapor itself, which is a more environmentally friendly way. And all-in-one condensing boiler price is fair. However, in the process of operation, maintenance is needed to ensure the stability of the operation. The following three aspects should be paid attention to in the daily maintenance of the condensing boiler.

1, attention should be paid to the maintenance of boilers as required to a large extent in order to check and detect the existence of problems in condensing boilers in order to be able to solve or prevent problems in a timely manner, and this will also avoid further expansion of the problems. It protects the furnace from further damage and should be careful not to add antifreeze in the water. All premixed aluminum condensing boiler manufacturers introduce that if the newly installed condensing boiler system should be thoroughly flushed, the remaining oil paper or metal debris and other impurities in the boiler should be removed.

2, pay attention to the fact that this step of installing filters is indispensable and can largely prevent the boiler from being damaged. Some preparations should be made before the condensing boiler is opened for official operation. Water circulation, for example, should take up to two hours so that impurities can be removed first. Condensing boiler manufacturers also remind after the end of operation, should be timely to open the safety valve, further removal of impurities inside.

3. Pay attention to cleaning work before installation. Before installation, special additives are also needed to clean all pipes. And condensing boiler manufacturers emphasize that cleaning agents must be neutral and absolutely not to have any acidity or alkalinity in order to avoid corrosion to the equipment. In short, it should be done according to the requirements of the manufacturer. Because the materials of ordinary condensing boilers are silicon-aluminum alloy, so they are very sensitive to alkaline substances, so the ph value of hot water in the boiler should never be controlled within the prescribed range of mixed additives must be prescribed by the manufacturer. You can't use other types at will.