he rv series high efficiency boiler
Our company attaches great importance to the quality of wine, winemaking process steam requirements provided very strict, party fast he rv series high efficiency boiler provides fully meet our needs, give us a brewery to provide strong support. --customer feedback
Pressure gauge he rv series high efficiency boiler boiler proper installation methods belong to a special operating process, we usually see the pressure gauge case, to observe the equipment is operating correctly, so the installation to correctly deal with it, to tell you about it below gauge correct installation method: 1, according to a high pressure vessel or boiler allowable pressure, draw red alert on the dial gauge, but the red alert should not be drawn on the glass to prevent rotation of the gauge glass delusional causing the accident. 2, the pressure vessel containing the high temperature, corrosive or high-viscosity media, should be installed in the pipeline connecting the container is filled with a pressure gauge and a liquid separator apparatus or use corrosion resistant corrugated flat membrane pressure gauges. 3, each boiler steam drum shall be fitted with a pressure gauge and space directly connected. 4, the installation position of the pressure gauge, should have adequate lighting, and inspection easy for the operator to observe, to prevent radiant heat, cold and vibration by pressure gauge. 5, for ease of replacement and checking the pressure gauge, the pressure gauge should be installed between the three-way cock and pressure equipment, tap should be installed in the vertical pipe section and have open flag and locking devices. 6, the boiler or the high-temperature steam as the working medium pressure vessel, the pressure gauge should be equipped to take over the trap, to condense the steam trap in this period, to avoid high-temperature steam directly into the Bourdon tube pressure gauge, resulting in the table the element overheating and distortion, affecting the accuracy of the gauge. 7, when the trap steel tube with an inner diameter not less than 10mm, should be equipped with pressure gauge and between the three-way cock trap to purge the line, unloading change, proof pressure gauge. 8, before the water valve, between the outlet separable economizer, superheater outlet and the main steam valve, pressure gauge should be installed. Pressure gauge boiler equipment play an important role in the composition, it can be seen as an integral equipment operation, only the right to install it in order to ensure the normal operation of the overall device, thus avoiding the occurrence of pressure can not be allowed to run.
3. The use of automatic burners, high automation, and effective fuel conservation
5. The use of threaded tobacco pipes enhances heat transfer and improves thermal efficiency.
6. The application of advanced digital control technology can accurately monitor the combustion process remotely. High degree of automation, a variety of protection and improve the realization of water level pressure and other automatic control.
7. Addition of a condensation heat exchanger at the smoke outlet to reduce the temperature of exhaust smoke and to absorb the sensible heat and latent heat in the flue gas and improve the efficiency of the boiler
Gas condensate waste heat recovery he rv series high efficiency boiler is how to do waste heat recycling?
Rapid socio-economic development, national environmental protection, energy conservation and comprehensive utilization of resources put forward higher requirements. Now, with the widespread use of gas-fired boilers in heating the heating industry, with coal-fired boilers with higher thermal efficiency, less polluting characteristics compared. Natural gas combustion in the boiler, about 90% of the energy is converted into heat, with a 9% energy loss and heat loss out of a 1% loss of energy through the surface of the heat dissipation. Thus, do a good job in front of the waste heat recovery work is particularly important.