hot sale industrial single boiler
The Fangkuai hot sale industrial single boiler believes that the correct adjustment of the supply and draft air volume is conducive to environmental protection, and it can also save energy under certain conditions. The Fangkuai boiler can first determine the suitable value of carbon dioxide or oxygen at the measuring point above the adjustment of the supply air volume. It is then compared with the measured value to determine if the supply air volume needs to be adjusted. If the boiler and flue are running under negative pressure, the outside air will leak into the flue from the wall or door of the furnace, obviously to the back of the flue, in the smoke. The higher the value. Therefore, when monitoring the supply air volume of boiler with carbon dioxide meter or oxygen meter, the influence of air leakage before measuring point should be considered. In order to determine the appropriate value of carbon dioxide or oxygen at the test point, it is difficult for the boiler to obtain the best excess air coefficient exactly in actual operation. The general regulation is to reduce the air flow as much as possible, that is to say, the manager reduces oxygen or increases carbon dioxide as much as possible, on the premise that there is no flame, dark red instability or black smoke in the combustion. In addition to adjusting the air flow into the furnace, attention should be paid to adjusting the air distribution. Negative pressure is one of the most important operating parameters in Fangkuai boiler. In normal operation, the negative pressure at furnace outlet should be 20? 30 Pa. If the furnace negative pressure is too high, it will cause the furnace and flue If positive pressure appears in the furnace, the flame and smoke in the furnace will be sprayed out of Shanghai, which will not only affect the environmental hygiene, but also may occur personal burn accident. 3. The heat loss of exhaust gas will be increased by the increase of air leakage, and the power consumption of the induced fan will be increased, if the furnace pressure is positive, the flame and smoke in the furnace will be sprayed to Shanghai. Therefore, in the process of combustion adjustment, it is necessary to adjust the air diversion site according to the change of furnace negative pressure in order to keep the furnace negative pressure in a normal value while adjusting the fuel quantity and air supply. When the boiler increases the load, it must first increase the draft air volume, then increase the supply air volume; on the other hand, when the boiler load drops, it must first reduce the supply air volume before reducing the draft air volume. Finally adjust the furnace negative pressure to the required value. Yes There is no draft air volume adjustment problem in micro positive pressure combustion boiler. Fangkuai boiler air volume regulation is easy, can easily meet your needs, sincerely welcome you to consult and negotiate business.
Model type energy saving hot sale industrial single boilers which 20 tons of steam boiler energy saving systems and supporting auxiliary equipment in fact, the whole meaning of 20 tons of gas hot water boiler, which includes boiler and auxiliary equipment. 20 tons of energy-saving and environmental protection boiler selling models are: WNS20-1.25-Y (Q), SZS20-1.25-Q, SZS20-120 tons of steam boiler energy saving systems and supporting auxiliary equipment is actually a set of 20 tons of gas hot water boiler meaning, including boiler and auxiliary equipment. Selling 20 tons energy saving boiler models: WNS20-1.25-Y (Q), SZS20-1.25-Q, SZS20-1.6-Y (Q), SZS20-2.5-Y (Q), ZG-20 / 3.82- Y (Q), ZG-20 / 4.2-Q, SHS20-2.5 / 400-Q, SZS20-1.25-Q, ZG-20 / 3.82-Q, ZG-20 / 4.2-Q. 20 tons of steam boiler is about 14MW hot water boiler, this boiler optional models include 20 tons of steam SZS gas hot water boiler and 20 tons of steam two kinds of gas hot water boiler WNS. In addition to the boiler itself, as well as auxiliary equipment such as a burner, safety accessories, security instruments, etc., which are provided by Zheng picked pot fine supporting manufacturers. The role of the body and auxiliaries are complementary, without exception, to ensure safe and stable operation of the boiler.
So in the context of this era, how did ZG hot sale industrial single boiler go through these 70 years? How do you plan to become a century-old company?
Due to increase market demand for air conditioning, we increased the number of production lines, faced with the urgent need of a steam hot sale industrial single boiler problems. Emergence of fast boiler is time for us to solve this problem. From the start of contract manufacturing to transportation to our company for installation and operation, Fang fast only 35 days to solve our urgent needs. --customer feedback