natural gas fuel 3 ton wns boiler
Factors affecting the energy saving heating fuel 3 ton wns boilers What are the reasons 1, strictly control the temperature of the boiler exhaust gas boiler heating some of the heat loss, exha reduce flue gas heat loss is an effective way to achieve energy-saving heating boilers. There is a certain temperature difference between the outdoor air temperature and the exhaust gas temperature. When the outdoor air temperature is lower than the exhaust gas temperature, exhaust heat loss is generated. Accordingly, the heating boiler exhaust gas temperature should be strictly controlled within the controllable range. If the exhaust gas temperature is too high, if the exhaust gas temperature is too low may increa, it will lead directly to the heating boiler running cost increases, which is due to the increased tail heating surface, so that the exhaust gas temperature as low as possible. In the energy saving work boiler should be carried out technical accounting and economic accounting. Accounting based on the dew point of the smoke, the tail heating surface and heat loss due to the consumption of the metal. 2, the carbon content of the slag reduce heating boiler First, the operation of the heating boiler in order to ensure the heating boiler that burns coal, the coal particle size be controlled, full use of coal resources, while achieving the purpose of protecting the environment. Secondly, reasonably boiler operating parameters adjusted to reduce the carbon content of the slag, that the ratio of coal to air is more reasonable and the coal before combustion in the furnace. Furnace temperature is a key factor in the index reflects a lot of energy-saving operation of the boiler. The carbon content of slag is one of them. In order to ensure energy saving heating boilers, efforts should be made to reduce the carbon content in the slag, timely elimination of negative factors affecting the normal combustion boiler. 3, the outer surface of the boiler furnace control temperature of the boiler size of the heat affected second two factors is the temperature of the boiler outer wall. It is also important for the outer wall temperature of the boiler, the influence of the external surface temperature of the boiler heating boiler. Relatively larger exterior wall area, the higher the temperature of the external walls, the greater the amount of heat to the surrounding environment. To reduce the heat radiation loss of a boiler, the boiler must be controlled outer surface of the body temperature. 4, to improve the thermal efficiency of the thermal efficiency of the heating boiler heating boiler is a comprehensive index of energy-saving measures. Improve the thermal efficiency of heating boilers, but also help to improve energy efficiency and heating boilers. Improve operational level boiler operator, control of boiler operating conditions, timely maintenance heating boilers, heating boilers to save energy. 5, timely monitor the operation of heating boilers timely monitoring of the operation of heating boilers, not only improve the operational efficiency of the boiler, environmental protection can not be underestimated. Different boiler room should take different measures, timely monitoring of the operation of heating boilers. Spread the boiler room should be checked by installing equipment, computer monitor should focus boiler room.
Select the first steam fuel 3 ton wns boiler to know what parameters? Steam boilers have the following main parameters: 1, Rated evaporation Rated evaporation is power steam boiler, steam boiler is the most important parameter, usually expressed in tons evaporation, that is, we usually say how many tons of boiler. 2, rated steam pressure rated steam pressure means that the steam pressure generated in the steam boiler, generally expressed in MPa or kg. 1MPa is 10 kg, like laundry, all hospitals, factories and the like conventional steam occasions the general use of low-pressure steam 1.0MPa or less. Only when using steam as a power to require the use of high-pressure steam. 3, where the steam temperature of said steam temperature, refers to the temperature of saturated steam. Saturated steam pressure and steam temperature are corresponding. Temperature of saturated steam at a pressure of 1MPa 184 ℃. 4, gas / oil / coal consumption fuel consumption is an important indicator of concern when choosing a steam boiler, which is directly related to the use of the running cost of the boiler. In the operation of the boiler, the fuel cost is very impressive, if just considering the purchase cost of buying a cheap but high energy boiler, which led to the late high operating costs, certain that it will be wasted. 5, the thermal efficiency of fuel consumption with the boiler thermal efficiency of boilers is inversely proportional. The higher thermal efficiency, lower fuel consumption of the boiler. Boiler thermal efficiency expressed as a percentage, the value is a more intuitive. 6, the boiler operating weight, size or location in the election of the steam boiler, it should find the place whether the load per unit area can withstand the weight of the steam boiler, and if there is enough space to place the steam boiler maintenance and reserve space.
ZBG export to more than 17 countries such as Thailand, Indonesia, Pakistan and so on, products are oil fired fuel 3 ton wns boiler and gas fired boiler.
State all the more attention to environmental protection, to provide more excellent atmosphere, we respond positively to the country's environmental protection, promote the fuel 3 ton wns boiler from coal to gas project. Among the many boiler suppliers, we chose the fast boiler. First, the party quickly done very well in terms of cleaning the boiler, the second is fast side also very comprehensive after-sales involved. The optional gas boiler was used after running fully meet the needs of our pharmaceutical production, both energy-saving and environmental protection, but also a very high thermal efficiency, saved us a lot of fuel costs. --customer feedback