ng thermic oil carboard factory water tube boilers
Jiangmen City, Guangdong Province issued 2019-- 2020, winning the Battle of Blue Sky embodiment, as follows.
1, a ban on new or expanded coal-fired thermal power units of fuel oil or coal-fired captive power plant business. A ban on new 35 tons of steam per hour of coal-fired boilers. Not the implementation of clean energy transformation and more than 35 tons of steam coal-fired boilers to complete the transformation of ultra-low emissions or shut down independent choice by the end of 2020.
2, and resolutely shut down environmental protection, energy consumption, safety, less than 300,000 kW coal units of non-compliance, timely decommissioning of units served their time every day, every day to promote the long running units early retirement. For shutting down the unit's capacity, coal consumption and emissions targets, allowed to trade and exchange, in co-ordination arrangements can save building capacity ultra-low emission coal-fired units.
3, the control total coal consumption, coal consumption in new coal project implementation reduction instead. Out of tea furnace, operating a stove, grain storage and drying equipment, coal-fired facilities, residents in the city's urban area with all bulk coal cleared.
4, speed up and clean alternative to coal-fired boiler industry, a comprehensive Mocha under construction, has been built, the proposed cogeneration, district heating project, and accelerating the construction of district heating projects. Accelerate the clean energy transformation of coal-fired boiler, before the end of 2020 to complete the transformation of coal-fired boilers clean energy per hour, 35 tons of steam.
The 1 ton wns series oil and gas ng thermic carboard factory water tube boilers adopts a horizontal three-return structure, and the boiler produces fast steam and high thermal efficiency. The boiler adopts a large-area combustion chamber. The combustion chamber is surrounded by a jacketed water jacket. A dense fire tube is arranged on the upper part of the combustion chamber, and an advanced combustion device is arranged. The fuel is fully burned in the combustion chamber, and the high-temperature flue gas enters the dense fire tube to continue to radiate heat. Then gathered in the smoke chamber for further heat release.
Gas fired hot water ng thermic carboard factory water tube boilers are designed as per the combustion characteristics of fuel oil and gas, improving heat transfer, reducing smoke emission temperature, decrease dust, SO2, NOx emission. Itadoptswetback&three-passstructurewhichensuresboilersafeoperationandextendservicelife.
4 tons of fuel ng thermic carboard factory water tube boilers Product description: 4 tons of fuel oil boiler is heated by a burner, fuel atomization effect, fuel combustion, can not see the chimney smoke, so the green fuel boilers, energy efficient. After spraying fuel through the burner into the furnace in the atomized droplets, and easily mixed with air and the rapid combustion heat flash. Compared with coal-fired boiler with the same capacity, and parameters, which furnace volume heat intensity may be increased about twice. But to reduce the thermal load of the burner zone, in order to avoid overtemperature waterwall tubes in this area, so the furnace volume is only reduced by about 1/3. Because the ash content of fuel oil is small, without slagging in the convection heating surface, it allows the furnace exit gas temperatures as high as 1300 ~ 1350 ℃, and narrow a pitch between the convection heating surface to increase the flue gas velocity, thereby increasing the heat transfer coefficient of the heating surface, the heating area savings and steel. Features: 1, the boiler burner automatic combustion control in accordance with instructions, stop, separate control box has a number of security, performance, security and stability, low maintenance. 2, the inner fire tube inserted spoiler retardant, smoke slow speed, to strengthen the heat exchanger, combustion heat conducting large extent to the water, the low temperature flue gas discharged from the smoke chamber, reducing heat loss and save fuel. 3, the water level sensor water level real-time monitoring, to continuously monitor the water level is normal furnace. While controlling the temperature and replenishment level sensor solenoid valves, the boiler water may be continuously supplied. 4, centrifugal multi-layer insulation glass wool, steel for packaging famous white color, heat loss, anti-rust appearance. 5, the product is widely used in hospitals, schools, hotels, hotel, bath center and other enterprises. Boot check: 1, various instruments, whether the instrument to confirm the adequacy of fuel tank, and the inlet valve is opened. 2, confirm the soft capacity and the water tank boiler water quality meets the requirements of the main valve is opened and boiler feed water inlet valve. 3, rotation of the oil filter to remove debris. 4, drain the remaining water in the boiler, while the opening operation of the low level alarm and chain. Boiling furnace process: 1, before the new boiler furnace should be boiled to remove impurities and dirt inside the boiler, or trisodium phosphate soda cooking oven may be employed to prepare a 20% concentration was added furnace (not note the solid directly into the furnace). 2, after closing the steam valve and the water table Hancock, opening the vent valve according to the procedure stoker firing power may be low heat and temperature rise at the beginning, when there is moisture in the furnace, close the vent valve when the valve is discharged from the vent, the furnace pressure is raised to be at around 0.1MPa, the boiler should be checked for leakage and various accessories such as fittings, if any leakage should be promptly fastened. 3, when the pressure in the furnace reached 0.3MPa, the normal shutdown program shutdown, let the furnace pressure decreased to 0.1MPa or less, the drain valve open, give up all the water in the furnace. 4, opening into the hole, rinsed with soft water inside the boiler until the washing water coincides with the degree of acid-base soft water, after closing and opening into the hole Hancock water gauge. 5, after the completion of cooking stove washing, all restore normal operation, before normal operation stoker.